Changing the oil in my Simpson pressure washer MS60773 was easier than I expected. Simpson Pressure Washer MS60773 Oil Change Instructions.

Regular oil changes are crucial to keep your pressure washer running smoothly and efficiently.

I learned that following the right steps can extend the life of the machine and help it perform at its best.

I remember feeling a bit uncertain about where to start, but I soon discovered that having the right tools on hand makes the process simple.

Knowing how to drain the old oil and add fresh oil not only improves performance but also prevents potential engine damage down the line.

If you’re looking to keep your pressure washer in top shape, I’m excited to share my step-by-step oil change instructions. This guide can help ensure that you get the most out of your Simpson pressure washer!

Preparing for the Oil Change

Before starting the oil change on my Simpson pressure washer MS60773, I make sure to gather all the necessary tools and supplies.

Having everything ready makes the process smooth and quick.

Here’s what I need:

• New oil: Check the manual for the right type.
• Oil filter: Replace if my model requires it.
• Wrench: A socket or adjustable wrench works well.
• Funnel: This helps avoid spills when adding new oil.
• Container: For draining the old oil.

I also like to wear gloves to keep my hands clean.

It’s important to work in a well-ventilated area to avoid inhaling any fumes.

Next, I ensure the pressure washer is off and cool. Safety first!

I disconnect the spark plug wire to prevent accidental starting.

After that, I prepare my workspace.

I place a tarp or old newspaper underneath the pressure washer. This keeps my area clean from any oil spills.

Finally, I read through the instruction manual to double-check any specific steps or warnings for my model.

Being prepared helps me feel confident and ready to tackle the oil change!

Locating the Oil Cap and Drain Plug

To change the oil in my Simpson pressure washer MS60773, I first need to find the oil cap and drain plug. These parts are essential for properly draining and refilling the oil.

Oil Cap:

I locate the oil cap at the top of the engine. It usually has a twist-off design. This is where I add new oil after draining the old oil.

Drain Plug:

Next, I look for the oil drain plug, which is typically found on the bottom of the engine. It may look like a small bolt. To drain the oil, I need to unscrew this plug.

To make this process easy, I position a drain pan under the drain plug. This helps catch the old oil as it flows out.

Steps to Find Them:

1. Check the Top: Look for the oil cap on the engine.
2. Inspect the Bottom: Find the drain plug underneath.
3. Set Up a Drain Pan: Place it right under the drain plug to avoid spills.

By following these steps, I can efficiently find both the oil cap and drain plug. This makes my oil change smooth and less messy.

Draining Old Oil

Before I start draining the old oil from my Simpson Pressure Washer MS60773, I ensure the engine is warmed up.

Warming the engine helps the oil to flow out smoothly.

Next, I set up my workspace to prevent spills and make the process easier.

Finally, I remove the oil cap for drainage.

Warm Up the Engine

Warming up the engine is an important first step.

I run my pressure washer for about 10 minutes. This heats up the oil, making it thinner and easier to drain.

I wait until it’s warm to the touch but not hot enough to burn me. This way, I get the most oil out during the change.

If the oil isn’t warm, it can be thick, and not all of it will drain.

Once done, I turn off the pressure washer and let it sit for a minute to cool slightly. This makes the next steps safer and easier.

Position Your Workspace

Setting up my workspace properly is essential for a smooth oil change. I gather:

• An oil pan to catch the old oil
• A wrench to remove the drain plug
• Rags for any spills
• Safety gloves

I place the pressure washer on a flat surface. This stabilizes it while I work.

I position the oil pan directly under the oil drain plug. This helps catch every drop of oil without mess.

I also make sure the area around my workspace is clear. This keeps me safe and allows easy access to my tools.

Remove the Oil Cap

I start by locating the oil fill cap, which is usually at the top of the engine.

I twist it off to create airflow. This step allows the old oil to flow out more easily.

If my model has a dipstick, I can remove that too. This helps to further reduce pressure, letting the old oil drain completely.

Carefully, I then go to the drain plug at the bottom of the engine.

I use my wrench to loosen it. Once it’s loose, I pull it out and let the old oil drain into the pan.

I make sure to let all the oil drain out to avoid mixing old with new oil later.

Replacing the Oil

Changing the oil in my Simpson pressure washer MS60773 is a simple task that helps keep the engine running smoothly.

I pay close attention to choosing the right oil and ensuring I fill it correctly.

Choose the Right Oil

When selecting oil for my MS60773, I make sure to use high-quality oil that meets the specifications listed in the manual.

Generally, I look for oil that has a viscosity rating of 10W-30, which works well for various temperatures.

I prefer non-detergent oil, as it helps reduce wear and tear on the engine.

Always check for any specific recommendations provided by Simpson to ensure I’m using the right type.

It’s a good idea to keep an oil funnel handy. This makes pouring oil much easier and helps avoid spills that can create a mess.

A clean work area is always best for completing this task.

Fill With New Oil

Next, I prepare to fill the engine with new oil.

I start by removing the oil fill cap from the top of the engine.

Using my funnel, I carefully pour the new oil into the fill hole. I take my time, ensuring I don’t overfill.

To maintain optimal performance, I recommend checking the oil level frequently.

After adding oil, I replace the fill cap securely. This step is crucial to avoid any leaks or dirt entering the engine.

Once I finish, I clean up any spills and properly dispose of the old oil.

It’s important to follow local guidelines for recycling or disposing of used oil.

Keeping my pressure washer well maintained ensures it runs efficiently for all my cleaning tasks.

Cleaning Up and Disposal

After I finish changing the oil in my Simpson pressure washer MS60773, I focus on cleaning up the area.

First, I always wipe down any spills with an old rag. This keeps my workspace tidy and safe.

Next, I empty the oil pan or container where I collected the old oil.

It’s important to never pour old oil down the drain.

Instead, I take it to a recycling center or a local auto shop that accepts used oil.

I make sure to seal the old oil in a container to avoid leaks.

Labeling the container as “Used Oil” helps others know what it is.

If I have filters or any oily rags, I also dispose of them properly.

For the tools I used during the oil change, I clean them thoroughly.

I wash them with warm, soapy water or a cleaner suitable for oil. This step prevents any buildup of grease or oil over time.

Finally, I take a moment to check my work area to ensure everything is back in place.

Maintaining a clean space is part of enjoying my pressure washer and keeping it in great condition for future tasks!

Final Steps

After completing the oil change on my Simpson pressure washer MS60773, I need to ensure everything is in order before using it again.

This includes checking the oil level and running the pressure washer to confirm it operates smoothly.

Check Oil Level

To check the oil level, I first make sure the pressure washer is on a flat surface. This gives me an accurate reading.

I locate the dipstick, which is typically found near the oil fill cap.

I remove it, wipe it clean, then insert it back without screwing it in. After removing the dipstick again, I can see the oil level.

The oil should be between the “full” and “add” marks.

If it’s low, I add the recommended oil type, ensuring it doesn’t exceed the full mark.

It’s always good practice to check for any leaks around the oil cap.

Keeping the right oil level helps the engine run efficiently and prolongs its life.

Run the Pressure Washer

Once I’ve checked the oil level, I’m ready to run the pressure washer.

I start by making sure I have water connected and the wand is fitted properly.

I turn on the pressure washer and let it run for a few minutes. This helps circulate the new oil throughout the engine.

During this time, I pay attention to any unusual noises or vibrations.

If everything sounds right, I let it run until it reaches operating temperature.

If I notice any smoke or odd sounds, I’ll stop the unit immediately to check for issues.

After running it, I may want to check the oil level again, as some oil might circulate out or be consumed during initial use.

Maintenance Tips

Keeping my Simpson pressure washer MS60773 in great shape is key to good performance. Here are some tips I always follow for smooth operation.

1. Oil Change: I make it a point to change the pump oil regularly. It’s best to do this after every 50 hours of use or at least once a season. Following the oil change instructions ensures I don’t miss any steps.
2. Check Hoses: I inspect the hoses and connections before each use. Look for any cracks or wear. Replacing damaged hoses helps prevent leaks and keeps the pressure washer working effectively.
3. Clean the Filter: I always check and clean the water filter. A clogged filter can decrease performance, so keeping it clean helps maintain good water flow.
4. Store Properly: During the off-season, I store my pressure washer in a cool, dry place. Cover it to protect it from dust and moisture, ensuring it’s ready for the next use.
5. Regular Maintenance: I follow the user manual for any other maintenance tasks. This might include checking the spark plug and ensuring the fuel is fresh.

FAQs: